Every piece of ONEWOOD can be transformed into any timber product without compromising on its structure, strength and even natural wood grain patterns.
ONEWOOD Properties & Specifications
ONEWOOD Homogeneous Reconstituted Timber (HRT)
Wood grains that look and feel just like natural timber. Each plank consists of randomised grains and knots are visible. ONEWOOD HRT has a resemblance with natural oak timber.
| Available Sizes | Measurement (mm) |
|---|---|
| Standard Block Size | 5 mm – 300 mm |
| Width | Up to 300 mm |
| Length | Up to 5500 mm |
*ONEWOOD Standard block sizes without jointing
PROPERTIES
Homogeneous Property
ONEWOOD is fabricated to be homogeneous in nature. This unique feature allows ONEWOOD to have intrinsic properties through out each and every block of timber, accompanied with its distinctive yet natural wood grain patterns.
High Durability and Dimensional Stability
ONEWOOD undergoes high pressure and high temperature processes which allows it to be structurally stable. ONEWOOD has achieved Durability Class 1¹ under EN 113-2 (2020) and EN 350 (2016).
Termite Resistant
ONEWOOD is less susceptible to termite infestation as compared to natural timber.
Water Resistant
ONEWOOD is naturally water resistant and is suitable for bathroom and kitchen area usage.
Low Flame Spread
ONEWOOD's fiber has been impregnated with fire retardant chemicals giving it its low flame spread property. ONEWOOD can achieve the following test standards:
| Fire Test Standard | Results |
|---|---|
| BS 476 Part 7 | Class 1 Surface Spread of Flame |
| EN 13501-1 | Class B-s1, d0 / Class Bfl-s1 |
All fire rated ONEWOOD products available on request.
Sustainable
ONEWOOD is made using natural fibers from fast growing plantation trees.
Easily Processed
ONEWOOD can be processed through the use of conventional wood working equipment.
Strong Structure
ONEWOOD has properties equivalent or better than tropical hardwood.
Perfect for Coating
ONEWOOD is compatible with Standard Polyurathane Coating (PU), Ultra-violet Curable Coating (UV) and Oil-based finishes.
Eco-friendly & Reusable
ONEWOOD's manufacturing processes are eco-friendly. Being homogeneous, it can be refurbished and reused for other uses.
*ONEWOOD Appendix with specific details of the properties above is available on request.
¹Durability Class 1 is the highest durability class awarded for timber products under EN 113-2 (2020) and EN 350 (2016).
Product Specifications
Tested according to ASTM D 1037 standards for evaluating properties of wood-based fiber, ONEWOOD can be placed on par with natural tropical hardwoods like Balau, Chengal, Teak and Ironwood.
| PROPERTY | RESULTS (Standard) | RESULTS (Metric) |
|---|---|---|
| Density | 56.2 - 62.4 lbs/ft3 | 900 - 1000 kg/m3 |
| Maximum Crushing Strength | 10,297 psi | 71.0 MPa |
| Shear Strength | 967 psi | 6.7 MPa |
| Work to Maximum Load | 7.72 lbf in/in3 | 0.05 N mm/mm3 |
| Janka Hardness | 1,583 lbf | 7,042 N |
| Bending Strength (MOR) | 13,714 psi | 94,557 kPa |
| Strength Retention after Aging | 101.5% | 101.5% |
| Modulus of Elasticity (MOE) | 1,989,797 psi | 13,719,167 kPa |
| SCREW WITHDRAWAL | RESULTS (Standard) | RESULTS (Metric) |
| Face | 646 lbf | 2,875 N |
| Edge Perpendicular to Long Side | 672 lbf | 2,991 N |
| Edge Parallel to Long Side | 513 lbf | 2,284 N |
| DIMENSIONAL STABILITY 50% – 90% R.H. | RESULTS (Standard) | RESULTS (Metric) |
| Length Expansion | 0.07% | 0.07% |
| Width Expansion | 0.204% | 0.204% |
| Thickness Swell | 0.373% | 0.373% |
Additional Product Specifications
Tested in accordance with European Standard DIN EN 408 (Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties) and DIN EN 13183-1 (Moisture content of a piece of sawn timber)
| PROPERTY | RESULTS (Average) | (Minimum/Maximum) |
|---|---|---|
| Moisture Content | 9.50% | 10.1% (max.) |
| Bending Strength (Flatwise) | 90.6 N/mm2 | 66.0 N/mm2 (min.) |
| Bending Strength (Edgewise) | 98.1 N/mm2 | 91.1 N/mm2 (min.) |
| Bending E-module (Flatwise) | 19,700 N/mm2 | 16,600 N/mm2 (min.) |
| Bending E-module (Edgewise) | 18,700 N/mm2 | 17,000 N/mm2 (min.) |
| Compressive Strength | 82.0 N/mm2 | 72.7 N/mm2 (min.) |
| Compressive E-module | 14,700 N/mm2 | 13,500 N/mm2 (min.) |
| Tensile Strength | 83.2 N/mm2 | 64.8 N/mm2 (min.) |
| Tensile E-module | 15,800 N/mm2 | 15,300 N/mm2 (min.) |
| Shear Strength | 7.9 N/mm2 | 6.0 N/mm2 (min.) |
| Shear E-module | 510 N/mm2 | 400 N/mm2 (min.) |
| Formaldehyde Emission** | 0.1 mg HCHO/(m2h) |
Tonality and Grain Variation
ONEWOOD is constituted of majority natural wood fiber. Its high natural fiber content result in tonality differences within each piece, and between different pieces of ONEWOOD. The grains of ONEWOOD defer in every piece / batch and they are homogeneous just like natural timber.
Oxidation may occur slowly over time and slightly darken the colour of ONEWOOD. There will be slight tonality difference between new pieces or freshly sanded down ONEWOOD in comparison with existing pieces of ONEWOOD.
Outdoor Weathering
ONEWOOD weathers naturally outdoors similar to natural timber due to its high natural wood fiber content. The surface of ONEWOOD turns into an elegant aging grey patina when exposed outdoors. Other typical characteristics of outdoor weathering includes surface checks. These features do not compromise the strength, durability and performance of ONEWOOD.
The rate of weathering effects on ONEWOOD varies depending on the amount of exposure to the elements such as UV rays and rain / moisture. Typically, under full exposure to sun and rain weathers ONEWOOD faster as compared to partially sheltered areas. When preferred, application of exterior coating on ONEWOOD’s surface can delay the effects of outdoor weathering.
Refurbishment
ONEWOOD can be easily sanded down to reveal a fresh layer of timber. The natural wood grains will still be visible after sanding down due to its homogeneous nature. After sanding, other treatments such as coating can be done if desired.